PPS2 - G10
10-port PPS and NMEA signal splitter
- 10 output ports
- Full galvanic isolation between ports
- NMEA message splitter
- Configurable Rs232 or Rs422 per port
- LED indicators
- 10-30VDC supply
- Small sturdy housing
Made to endure
Our standard PPS3- G10 is designed for the most demanding applications.
It is configurable to handle almost every PPS source and distribute the signals to multiplepulse consumers
- Full Featured splitter
- RS232 and RS485 support
A standard D-SUB connector is used, allowing seamless switching between RS232 and RS485 on a per-channel basis. It supports data transmission speeds of up to 115200 baud, ensuring flexible and reliable communication.
- Highly configurable PPS input
Our PPS Pulse Splitter input provides extensive configuration options, including adjustable trigger voltage, input impedance, and selectable rising or falling edge detection, ensuring optimal flexibility and performance.
- Clear LED indicators
- Toggled PPS pulse output
The toggle PPS pulse output is accessible via the D-SUB connector in RS232 mode, with the signal level alternating on each input pulse for precise synchronization.
- Durable build
The housing is constructed from a strong, sturdy steel, designed to withstand operating temperatures ranging from -20°C to +50°C, ensuring reliability in demanding environments.
Technical Data
Communication Ports
- Support both Rs232 and RS485
- Max baud rate 115200 baud
- Supports all protocols parity and bitsettings
PPS pulse Output
- Minimal length after stretching 20ms
- Voltage level 5V
- Signal impedance 50 Ohm
- Delay from input
- Delay difference between channels
PPS pulse input
- Trigger levels 1V - 2V - 3V - 4V
- Signal impedance 50 Ohm or high impedance
- Rising or falling edge trigger
Power characteristics
- Wide input: 10-30VDC
- Max power consumption: 10 Watt
Back connections
- 10 x BNC (PPS outputs)
- 10 x 9P D-SUB female (NMEA outputs)
- 1 x BNC (PPS input)
- 1 x 9P D-SUB male (NMEA input)
- 1 x 3P male M16 (power)
Environmental
- Operational temperature: -20°C +50°C
Mechanical
- 440mm x 226mm x 44mm (without brackets)
- 483mm x 226mm x 44mm (with brackets)
- Weight 2650 gram
Our tailored solutions
Take your splitter to the nex level!
Through partnership, we deliver tailored engineering solutions—from land surveys to marine operations—designed to streamline processes, minimize risks, and maximize performance across industries
Related insights
