CANCO2

The machine control interface solution

The CANCO2 was designed to tackle all machine control interface challenges. It completes our machine control product range by bringing all sensor data to the controller via one ethernet interface.

FEATURES

ONE BOX SOLUTION FOR ALL YOUR MACHINE INTERFACES

  • 2 CAN interfaces
  • 1 Quadrature channel
  • 2 digital inputs
  • 2 digital outputs
  • 2 SERIAL ports
  • Works seamlessly with our other MC products

ETHERNET OR WIFI COMMUNICATION

  • All data is available over IP
  • Supports both TCP/IP or UDP
  • Go for a truly wireless wifi connection to the MC controller

INTEGRATED POWER SOLUTION

  • Power is available on all connectors
  • One power cable to the CANCO2
  • Wide input 10 – 30 VDC
  • CAN busses are galvanically isolated

CAN busses

  • Fully galvanically isolated power & data
  • Connect and power your CAN sensors
  • Internal CAN termination

QUADRATURE SIGNALS

  • Connection for encoders for slew, bucket rotation etc..
  • Connection for flow meter
  • Can interface NPN and PNP encoders
  • Power available on the connector
  • Z-index signal connection

SERIAL PORT INTERFACE

SERIAL PORT INTERFACE

  • Connect your GNSS receiver
  • Power is available on the connector
  • Behaves as a raw TCP/IP socket

Standard connectors

  • Easy to find/replace cables
  • Interfaces easily with other equipment
  • No expensive replacement cables

SPECIFICATIONS

CAN interface :

  • Fully galvanic isolation
  • Isolated 24V power supply
  • 20W per bus
  • Supported baudrates:

SERIAL ports :

  • Power is available on PIN 9
  • Supported baudrates
  • Supported settings

QUADRATURE channel :

  • Supports NPN & PNP mode
  • Supports Z referencing
  • 24V power available on connector

Digital OUTPUTS :

  • Two fully galvanic isolated outputs
  • Max open contact voltage :30V
  • Max current 0.5A
  • 24V power available on connector

Ethernet  :

  • 10/100 Mbit
  • 24V POE

Digital INPUTS :

  • Will switch from 10-30VDC
  • 24V power available on connector

Supported IP protocols :

  • UDP multicast
  • TCP/IP

Back connections :

  • 1x 10-30 VDC power input
  • 2 x 9P D-SUB female (COM1&2)
  • 1 x RJ-45 (ethernet)
  • 1 x M12 (DIGITAL I/O)
  • 1 x M12 (QUADRATURE)
  • 2 x M12 (MC CAN)

Mechanical :

  • 149mm x 172mm x 55mm
  • Weight : 880 gram

Power characteristics :

  • Wide input : 10-30VDC

DOWNLOADS

BROCHURE

RELATED PROJECTS