Multifunction angular sensor

The SAE1 is a high accuracy angle CAN sensor. It is specifically designed to be used in demanding machine guidance applications. It can be software configured as a full 360° angle sensor or a +-90° pitch roll sensor. Its stainless steel housing and connectors provide protection in the harshest environments.


Best in class accuracy

  • 0.1° accuracy
  • 0.025° resolution

Fully calibrated and verified sensor

  • Every sensor has to pas our calibration testbench
  • Pitch,roll and rotational calibration bench
  • >6h stability test

Durable stainless steel build

  • 1 piece stainless steel enclosure
  • Stainless steel M12 connectors
  • Mounting plates available

Configuration software available

  • Configuration package SeCon
  • Configure all attached sensors via the CAN bus

Underwater connector version available

  • M12 connectors can be used underwater
  • For harsh environments and deeper applications underwater connectors are availabel
  • Connectors are wet mate able


Technical specifications :

  • Measurement range rotational: 360°
  • Measurement range Pitch/Roll: 30° (will go up to 90° but not within accuracy spec)
  • Sensor accuracy: 0.1° (rotational & pitch-roll)
  • Sensor resolution: 0.025°
  • Max update rate: 30 Hz (software programmable down to 1 Hz)
  • Data interface: CAN (for protocol information please refer to the protocol documentation)
  • Housing & connector material: Stainless steel 316
  • Weight: Approx 1.1 Kg
  • Size: 148 x 74 x 36 mm (L x w x h)
  • IP rating: IP 69K (Can be pressure washed)
  • Submersible up to 16 m (Tested up to 4 bar) M12 connectors

Power characteristics :

  • Power supply : 10-30 VDC (can run on 12 V and 24 V systems)
  • Power consumption : < 1 Watt

Operating temperature :

  • -20°C to +60°C