ENC1

Quad channel quadrature interface

The ENC1 is a four channel quadrature encoder interface for machine guidance applications. It is fully software configurable and can be used with most standard PNP, NPN and push-pull encoders or inductive sensors.

FEATURES

SINGLE BOX SOLUTION

  • 4 channels
  • every channel has a reference input

MANY COMPATIBLE ENCODERS

  • Encoder power available on the connector
  • NPN/PNP & push/pull encoder compatible
  • No rewiring needed

INDUCTIVE SENSOR COMPATIBLE

  • Compatible for reference and signal generation
  • Split cables available
  • Sensor power can be supplied by ENC1

Configuration software available

  • Configuration package SeCon
  • Configure all attached sensors via the CAN bus

SPECIFICATIONS

Technical specifications :

  • Number of channels: 4
  • Supported encoders: NPN / PNP and PUSH-PULL (over power supply range)
  • Referencing: Every channel has own reference inputs
  • Encoder power: Can draw power from ENC1 (max 300 mA)
  • Max update rate: 30 Hz (software programmable down to 1 Hz)
  • Data interface: CAN (for protocol information please refer to the protocol documentation)
  • Housing material: Coated aluminium
  • Weight: Approx 780 g
  • Size: 1234 x 154 x 47 mm (L x w x h)
  • IP rating: IP 66

Power characteristics :

  • Power supply : 10-30 VDC (can run on 12 V and 24 V systems)
  • Power consumption : < 2 Watt

Operating temperature :

  • From -20°C to +60°C

DOWNLOADS

BROCHURE

RELATED PROJECTS