PPS2-G4

4 Port PPS & NMEA isolated signal splitter

The PPS2-G4 is a 4 port PPS pulse splitter and NMEA signal splitter designed for the most demanding applications. It is configureable to handle almost every PPS source and distribute the signals to multiple PPS pulse consumers.

FEATURES

Full featured splitter

4 output channels
Full galvanic isolation
Integrated NMEA splitter
Handles all protocols, parity and bit settings

SUPPORTS BOTH RS232 AND RS485

Uses standard D-SUB connector
Simple switch to select RS232 of RS485
Selectable per channel
Up to 115200 baud

Highly configurable PPS input

Trigger voltage settable
Input impedance can be configured
Rising/falling edge can be configured

CLEAR LED INDICATORS

Fast and easy operational check
Power, PPS Pulse trigger & data communication LED

Toggled PPS pulse output

Available on the D-SUB connector
RS232 signal level
Level toggles on every input pulse
Only available in RS232 mode

Durable build

Strong sturdy steel casing
Wide range 10-30VDC input power supply
-20°C to +50°C operation

SPECIFICATIONS

Communication ports :

Support both RS232 and RS485
Max baud rate 115200 baud
Supports all protocols parity and bitsettings

PPS pulse input :

Trigger levels 1V / 2V / 3V / 4V
Signal impedance 50 Ohm or high impedance
Rising or falling edge trigger

PPS pulse output :

Minimal length after stretching 20ms
Voltage level 5V
Signal impedance 50 Ohm
Delay from input
Delay difference between channels

Back connections :

4 x BNC (PPS outputs)
4 x 9P D-SUB female (NMEA outputs)
1 x BNC (PPS input)
1 x 9P D-SUB male (NMEA input)
1 x 3P male M15 (power)

Mechanical :

228mm x 126mm x 44mm (without brackets)
268mm x 126mm x 44mm (with brackets)
Weight 960 gram

Environmental :

Operational temperature : -20°C +50°C

Power characteristics :

Wide input : 10-30VDC
Max power consumption : 5 Watt

DOWNLOADS

BROCHURE