The ENC1 is a four channel quadrature encoder interface for machine guidance applications. It is fully software configurable and can be used with most standard PNP, NPN and push-pull encoders or inductive sensors.
To not load the CAN bus too heavily you have the option of setting the output mode in continuous, polling or on change mode.
Y-cables are available to easily wire up complex configurations. Power is available on every channel so encoders can be easily powered from the ENC1.
Power is available on every channel so encoders can be easily powered from the ENC1.
The ENC1 is fully software configurable and allows setting of ID, update rates, output modes etc.
Its four input channels each have an 8 pin M12 connector that can be used to connect a quadrature and reference signal. This signal can come from an encoder, hydraulic flow meter or inductive sensors. Each channel is designed so that it does not have to be configured whether a NPN, PNP or push pull signal is connected.
Take your splitter to the next level!
Through partnership, we deliver tailored engineering solutions—from land surveys to marine operations—designed to streamline processes, minimize risks, and maximize performance across industries
